|
| |
Item# |
Product Name |
Price |
Quantity |
|
Click to Enlarge
|
|
| | | | | The original 'REDHEAD' Immersion Slip Pump - MEDIUM |
|
|
|
| PUMPS 8 GPM This immersion-type REDHEAD slip Pump enters the slip from the surface while suspended from the side of the tank with a bracket arm. The motor and motor mount are above the surface of the slip. The motor and pump impeller shafts are aligned as one unit. There are no bearing or seals--except motor bearings--used. Where the impeller shaft enters the impeller housing, Teflon stabilizer rings are used. The unique REDHEAD Pump Support allows the pump and motor to be perfectly aligned. The REDHEAD slip pump also does its own agitation. This is accomplished by jet ports in the pump--much like a whirlpool bath--which ejects jet streams of slip, keeping the slip in constant gentle agitation. No air is picked up in the system. The slip is pulled into the housing through the stainless steel screen on the bottom and jetted out across the tank. All action is below the surface. The pump is normally kept submerged in the slip--only being removed for occasional cleaning. However, it can also be removed at any time and used to pump slip from storage containers, mixers, or dump areas under your drain tables. |
|
|
Click to Enlarge
|
|
| | | | | The original 'REDHEAD' Immersion Slip Pump--LARGE |
|
|
|
| PUMPS 8 gpm-- This immersion-type REDHEAD slip Pump enters the slip from the surface while suspended from the side of the tank with a bracket arm. The motor and motor mount are above the surface of the slip. The motor and pump impeller shafts are aligned as one unit. There are no bearing or seals--except motor bearings--used. Where the impeller shaft enters the impeller housing, Teflon stabilizer rings are used. The unique REDHEAD Pump Support allows the pump and motor to be perfectly aligned. The REDHEAD slip pump also does its own agitation. This is accomplished by jet ports in the pump--much like a whirlpool bath--which ejects jet streams of slip, keeping the slip in constant gentle agitation. No air is picked up in the system. The slip is pulled into the housing through the stainless steel screen on the bottom and jetted out across the tank. All action is below the surface. The pump is normally kept submerged in the slip--only being removed for occasional cleaning. However, it can also be removed at any time and used to pump slip from storage containers, mixers, or dump areas under your drain tables. Choose length size below (Length is measured from the mounting plate under the motor to the bottom of the pump housing). |
|
|
Click to Enlarge
|
|
|
|
|
| The external mounted pump kit. Use it on your tank--it's available as a kit for the do-it-yourselfer. Kit includes 1/3 HP motor, base, coupler, 8' cord with inline switch, pump housing, 8' 1" ID hose, 1" utility nozzle. |
|
|
Click to Enlarge
|
|
| | | | | The original 'Redhead' Slip Pump -- SMALL |
|
|
|
| PUMPS 8 gpm-- This immersion-type REDHEAD slip Pump enters the slip from the surface while suspended from the side of the tank with a bracket arm. The motor and motor mount are above the surface of the slip. The motor and pump impeller shafts are aligned as one unit. There are no bearing or seals--except motor bearings--used. Where the impeller shaft enters the impeller housing, two Teflon stabilizer rings are used. The unique REDHEAD Pump Support allows the pump and motor to be perfectly aligned. The REDHEAD slip pump also does its own agitation. This is accomplished by jet ports in the pump--much like a whirlpool bath--which ejects jet streams of slip, keeping the slip in constant gentle agitation. No air is picked up in the system. The slip is pulled into the housing through the stainless steel screen on the bottom and jetted out across the tank. All action is below the surface. The pump is normally kept submerged in the slip--only being removed for occasional cleaning. However, it can also be removed at any time and used to pump slip from storage containers, mixers, or dump areas under your drain tables. |
|
|
Click to Enlarge
|
|
| | | | | SLIPMASTER 'Little Sucker' |
|
|
|
| New from SLIPMASTER. Fill and drain big molds quickly and easily with the LITTLE SUCKER. Use the LITTLE SUCKER in your present pouring equipment or in SLIPMASTER tanks. Anyone can use it. Just insert the pickup tube into your slip tank, turn it on and pour your molds. To drain: put the tube into the mold and just reverse the process. |
|
Click
Here for Shipping Information